Home / Blog

How do thermos flasks work?


How do thermos flasks work? Discover how a vacuum between two walls slows heat loss, why the lid matters, the meaning of stated hot and cold times, and how to get better results.

Everyday science • Vacuum insulation • Practical care

The flask that keeps tea warm through a long journey is doing something deceptively simple: slowing the movement of heat.

A practical guide to vacuum flasks

You make tea before leaving home. Three hours later, you unscrew your flask and pour a cup that is still hot. Yet the outside of the container feels almost like the room around it. How can something hold on to heat without feeling warm itself?

How does a thermos flask work? It has an inner and outer wall with most of the air removed from the space between them. That vacuum dramatically reduces heat transfer by conduction and convection; reflective surfaces can reduce radiative heat transfer too. An insulated, well-fitting lid limits heat escaping through the opening. The design works in either direction, helping cold drinks stay cold as well.

It is not a source of heat, and it cannot keep a drink at exactly the same temperature indefinitely. Understanding where heat can still travel explains why different flasks perform differently, why a loose stopper makes such a difference and why their advertised times are best treated as a guide.

How does a thermos flask stop heat escaping?

Put hot tea into an ordinary mug and its temperature starts moving towards that of the room. A thermos flask slows that journey by tackling three ways heat moves: conduction, convection and radiation. These are different processes, which is why the vacuum and the flask's surfaces both matter.

How heat moves What happens in an ordinary container What a vacuum flask changes
Conduction Heat passes through the material of the cup and anything in contact with it. The evacuated gap greatly reduces heat transfer between the two walls. Some heat still passes through solid connections, especially around the neck and lid.
Convection Moving air or liquid carries heat from one place to another. With almost no air between the walls, there is virtually no convection in that gap. The lid limits the exchange of warm and cool air at the opening.
Radiation Surfaces exchange heat through infrared radiation. Reflective surfaces, where used in the construction, reduce radiant heat transfer across the gap.

Heat can still escape through the stopper, the bottle's neck and other solid parts. That is why a vacuum flask is an exceptionally effective insulator, not a perfect one. The same design slows heat moving into an iced drink on a hot day.

The clever part isn't adding heat. It's making heat take a much slower route.

What's inside a thermos flask?

Most modern vacuum flasks contain two stainless-steel walls connected at the neck. During manufacture, much of the air between them is removed and the space is sealed. Some flasks use reflective surfaces to further limit heat transfer. The lid, meanwhile, has its own seal and insulation: it closes a point where the two-wall vacuum cannot continue.

Illustrated cutaway of a thermos flask showing the inner wall, insulating vacuum, outer wall and lid seal
Inside a vacuum flask: two walls separated by an insulating vacuum, with a sealed lid at the top.
01 / The inner wall

Holds the drink

This is the surface that touches your tea, coffee or cold water. It is usually stainless steel in modern reusable bottles.

02 / The vacuum gap

Slows heat transfer

Removing the air between the walls prevents air circulation there and greatly reduces conduction through gas.

03 / The stopper

Closes the weak point

A properly closed lid helps limit air exchange and heat transfer around the opening.

A laboratory invention that found its way into everyday life

The story begins with Scottish scientist James Dewar. In 1892, he developed a vacuum-jacketed flask to keep substances extremely cold during research into liquefied gases. The Royal Institution's surviving example had glass vessels fitted inside one another. By 1904, the idea had been commercialised by the company behind the Thermos name. It was a scientific solution for preserving low temperatures before it became a familiar way of keeping tea hot.

Glass-lined flasks still exist, but stainless steel is generally better suited to everyday knocks. A vacuum flask can, however, lose effectiveness if damage compromises its sealed insulating gap.

How long does a thermos flask keep drinks hot?

There is no single answer. Some insulated cups are designed for a short commute; other double-walled bottles aim to keep drinks hot for many hours. Size, lid construction, the starting temperature of the drink, outside temperature, fill level and how often you open the flask all influence the result.

To make that difference tangible, here are three stated performance claims from Loopper's UK product listings, checked on 18 November 2026. These are descriptions on the product pages, not independently verified laboratory results or guarantees of what every user will experience.

Product listing comparison

Three designs, three different claims

Insulated mug · 250 ml
2h

Stainless steel and plastic; listed as 2h hot.

Thermo cup · 350 ml
8h

Stainless steel; listed as 8h hot and 24h cold.

Recycled steel tumbler · 350 ml
12h

Push-top mechanism; listed as Hot for 12 hours.

Source: Loopper UK travel mugs category; product descriptions accessed 18 November 2026. Actual temperature retention depends on conditions. Recheck the live product pages before publishing.

The comparison is useful precisely because the figures are not interchangeable. The first is a small insulated mug; the second quotes separate hot and cold performance; and the third describes a specific tumbler with a push-top lid. Do not assume every thermos flask, or even every item made from stainless steel, will achieve the longest figure.

If you are choosing between formats, compare the intended use: personalised thermos flasks for carrying a drink over longer periods, thermos cups for a desk or short trip, and travel mugs for easy sipping on the move. Those are practical distinctions, not performance guarantees.

Does size make a difference?A larger, well-filled flask often cools more slowly than a smaller or half-empty one, because the amount of liquid is relatively large compared with the area through which heat can escape. Lid design and insulation quality can matter just as much, so size alone is not a reliable ranking.

How can you keep drinks hot for longer?

A little preparation helps the insulation do its job. Start by reading the manufacturer's care and temperature instructions: not every container is intended for boiling liquids, and some drinking lids need extra caution with hot drinks.

  1. 1

    Pre-warm carefully

    Where the maker allows it, warm the interior with hot water, empty it, then add your drink. Avoid assuming boiling water is suitable for every model.

  2. 2

    Use a sensible fill level

    Fill close to the recommended maximum without overfilling. Leaving a very large air space means less warm liquid inside to retain heat.

  3. 3

    Keep the lid closed

    Open only when needed and fasten the stopper correctly. Repeatedly opening a flask lets heat escape through its least insulated point.

Look after the seal and the finish

Wash the bottle and the removable parts as directed by the manufacturer, and allow them to dry fully before storage. Never put a metal flask in the microwave. Dishwasher suitability depends on the particular design and finish, including printed branding. If the outside of an intact vacuum flask becomes unusually hot when filled with a hot drink, or its performance drops sharply, inspect it and consult the maker rather than assuming every small dent has destroyed the vacuum.

For a business, that last point is relevant beyond the physics. A flask selected for employees who travel or work outdoors needs to be comfortable to carry, easy to open and suitable for its intended drink. A personalised thermos flask can become something a person reaches for repeatedly when its design fits the routine. A carefully chosen printed or engraved finish should follow the supplier's care guidance so the branding remains presentable.

The best flask is not the one with the biggest number on the listing. It's the one whose insulation, lid and daily use match the way its owner actually drinks.

Written by

Wissam Amestoun

Marketing team, Loopper

Exploring the use, design and practical details behind everyday promotional products.

Connect with Wissam on LinkedIn

Lars RudContent reviewed by Lars Rud, Marketing Manager at Loopper

Do thermos flasks keep drinks cold as well as hot?
Yes. The vacuum reduces heat transfer in both directions, helping cold drinks stay cold and hot drinks stay hot. The actual duration depends on the flask, its lid and the conditions in which it is used.

How long does a thermos flask keep tea hot?
There is no single duration. Loopper's UK listings include an insulated 250 ml mug described as keeping drinks hot for 2 hours, a 350 ml thermo cup described as 8 hours hot, and a 350 ml tumbler described as 12 hours hot. These are product listing claims, not guaranteed results. Check the specifications for your particular flask.

Can you put a fizzy drink in a thermos flask?
Only if the manufacturer explicitly permits it. Carbonated drinks can build pressure in a sealed container, potentially causing leaking or an unexpectedly forceful opening.

Can you put a thermos flask in the dishwasher or microwave?
Never put a metal flask in a microwave. Dishwasher suitability varies by product and lid, so follow the care label. Hand washing may be recommended to protect seals, coatings and printed logos.

How can you tell if a thermos flask has lost its vacuum?
A noticeably warmer outer wall than usual when holding a hot drink, or a marked drop in insulation performance, can suggest a problem. A dent alone does not prove the vacuum seal has failed. Follow the manufacturer's inspection and replacement advice.

What do our clients say?

SYLVIE
Communication was smooth and very clear throughout the cr..
Show whole review
Communication was smooth and very clear throughout the creation of our personalised BIC 4 Colours pens. Changes were handled very quickly, and the delivery exceeded our expectations. The team was professional and attentive, and we had the same contact person available by phone and email throughout the process. I highly recommend them.
Fran
I ordered 50 printed thermal mugs from Loopper as corpora..
Show whole review
I ordered 50 printed thermal mugs from Loopper as corporate gifts and had several questions about the print quality, size and colour matching. Every question was answered quickly and clearly. The mugs arrived about a week after ordering, very well packaged and with a great-quality print. Fast service and a result I am very happy with. I would recommend Loopper and plan to order again in the future.
Jenni
My request was handled quickly, and the communication was..
Show whole review
My request was handled quickly, and the communication was clear and helpful throughout. The product arrived on time and was well packaged. The whole process was easy, and the product quality was very good. I would happily order again.
Jean-Paul HAUTIER
An excellent experience from start to finish: great custo..
Show whole review
An excellent experience from start to finish: great customer service, high-quality materials and workmanship, on-time delivery and carefully packaged goods. The Loopper team was professional throughout. We will definitely come back for future products. I highly recommend this company.
Mockup Free design & unlimited revisions Within 1 hour!
We pride ourselves in a fast but qualitive service without exception. Within 1 hour of your offer request or order, we will provide you with a free digital mock-up without any strings attached. This way we make sure to have a good start to making that deadline!
Custom made Custom
made
Create your own product!
We go above and beyond to make sure you are happy. We offer over 6000 products that you can make your own. Looking for that special product? We have our own creative department that custom designs your idea. You name it, we produce it!
Experience 24 years of experience Give us a challenge!
With 24 years of experience we have learned that human contact and knowledge about our products is key to what we do. We distinguish ourselves by always making sure that there is someone allocated to your project that will think along with you to get the best results.

About Edwin den Hartog - Founder of Loopper

Edwin den Hartog is the founder of Loopper and a hands-on expert in promotional merchandise with over 20 years of experience in the industry.
From supporting leading European brands to heading one of the fastest-growing promotional companies in Europe. 
Edwin’s mission is clear: to deliver creative, high-quality products, paired with personal service and rapid delivery.

Read more about Edwin →